Mold Testing vs. Remediation on Long Island: Why NY Wants Two Firms
Mold testing on Long Island is not the same job as mold removal, and New York law keeps the two apart on purpose. When a business is paid to deal with more than 10 square feet of mold, one licensed company assesses the problem and writes the plan, a different licensed company does the cleanup, and the assessor signs off at the end.
That separation is the part most homeowners never hear about until a contractor offers to "test and fix it" in one visit. The details below come from the state's own pages, current as of November 2026.
Why the company that writes the plan can't be the one that does the work
The rules sit in Article 32 of the New York Labor Law, and the NYS Department of Labor runs the mold program. Section 936 of the law says a licensee may not perform both mold assessment and mold remediation on the same property. It also bars anyone from owning an interest in both the assessment firm and the remediation firm on that property. The logic is simple: the party defining the scope of work should not be the party paid to carry it out.
The Department's fact sheet, Mold Assessment and Remediation in New York State, fills in the rest:
- One mold company may do the first assessment and the clearance assessment after the cleanup. A different company has to do the cleanup itself.
- The Department's mold FAQ says an owner's waiver does not change the rule.
- The same FAQ discourages a remediator quoting a price before an assessor has defined the job, because that removes the independence the law is meant to give you.
When the law applies and when it doesn't
The trigger is a "project," which section 930 defines as mold remediation, assessment or abatement of areas greater than ten square feet. Routine cleaning is excluded. The pages we read do not say how separate patches are added together, so ask any assessor how they measure the area.
- Anyone who does assessment or remediation on a project, or advertises that they do, needs a state license, per section 931 and the program page. That includes a home inspector whose inspection is "designed to discover mold."
- Property owners are not required to clean up mold, according to the Department's fact sheet. If you hire a professional, though, they must follow the law.
- Under section 933, a homeowner working on their own residential property needs no license. Other owner and employee exemptions exist for larger buildings, so read the section if you manage property.
- The Department's FAQ says that if the area is under 10 square feet and you aren't sensitive to mold, you may remove it yourself.
The five boroughs layer city rules on top of the state's. If you rent in New York City, start with our post on mold in an NYC apartment instead.
What a mold test can and can't tell you
"Testing" is the word people search, but the state's own guidance is skeptical of it. The fact sheet What to Expect When You Hire a Mold Assessor lists the reasons sampling is rarely recommended:
- Mold is part of the natural environment, so some is always in the air and on surfaces.
- Sampling will almost always find mold or spores.
- There are no national or state standards to compare sample results against.
- Knowing the exact species is not typically useful unless you know which one a person is allergic to.
The EPA's brief guide to mold, moisture and your home agrees: no federal limits exist for mold or mold spores, and when mold is visible, sampling is usually unnecessary. It does say surface sampling may help confirm an area was cleaned well, done by someone experienced in it.
What the Department calls the most important step is a thorough visual inspection, often with a moisture meter. Before anyone samples, ask what type of sampling, why it's needed, and what it will show that you don't already know. The law sets no price for an assessment, so get estimates from more than one assessor, and make sure each bids on the same scope.
What the written plan and the clearance report have to say
Under section 945, the assessor prepares a remediation plan specific to your project and gives it to you before work begins. Per the fact sheet, the plan covers:
- The rooms or areas involved and an estimate of the material to be cleaned or removed.
- The methods for each area, and containment where needed to keep mold from spreading.
- Recommended protective equipment for workers.
- Clearance procedures and criteria for each area.
- Notice and posting recommendations if the property is occupied.
- An estimate of cost and time.
- The source of the moisture, when it can be found, and what type of contractor can fix it.
If the plan calls for a disinfectant, biocide or antimicrobial coating, it can name one only if it is EPA-registered for that use and applied per the label, with occupant sensitivities considered.
One job from start to finish
Picture a bathroom supply line that leaked behind a wall for a few weeks. This is an illustration, not a case. In order, a compliant job looks like this:
- The leak is stopped and wet materials are dried. The EPA says mold usually doesn't grow when wet items are dried within 24 to 48 hours, which is why speed matters.
- The assessor inspects, writes the plan and hands you a copy. You pass it to remediation contractors so their bids cover the same work.
- The remediator writes a work plan that meets the assessor's plan and gives it to you before site preparation starts, per section 946. Signs go up at the entrances to the work area, and a copy of the license is posted at the site.
- Containment stays in place until the assessor's clearance. The remediator isn't allowed to take it down before then.
- The assessor does the post-remediation assessment under section 947. If the area is free of visible mold, the work followed the plan and the clearance criteria were met, you get a written passed clearance report. If not, you and the remediator get a final status report on what is left.
- The moisture source gets fixed. A remediator isn't required to repair it if they lack the expertise, which is why the plan names the trade that can.
The Department recommends using the same assessor for clearance, though it isn't required. If you skip the clearance assessment, the fact sheet says the companies should get documentation that you accept the work as is.
Need the water problem handled first? GlobePro Restoration takes calls at any hour at (929) 969-2534. Our water damage restoration work is about finding and drying the wet areas; our signs of hidden water damage guide helps you spot what's behind the wall.
Ask any company these questions before you sign
- What is your license number, and what type is it: assessment contractor, remediation contractor, or worker? Check it in the Department's licensed mold contractors search.
- Is the company that assessed the job unrelated to the one cleaning it? Does anyone own a piece of both?
- Do you carry liability insurance? The Department's FAQ says assessment and remediation firms must carry at least $50,000, so ask for the certificate.
- Do your workers hold abatement licenses?
- Will I get the written plan before work starts, and a passed clearance report at the end?
- If you want to sample, what exactly will it show?
This applies to every firm, including GlobePro. Our mold remediation page describes the service, but the license number and the plan are the proof, so ask anyone for both. To report a problem, the Department has an online complaint form on its program page, and its License and Certificate Unit is at (518) 457-2735.
Seven Long Island places, one question
The law is statewide, so these rules are the same in each of these ZIP codes. What differs is the setting, and mold follows moisture, so the first question is always where the water came from.
- 11550, Hempstead (Nassau): Hempstead is the most populous village in New York state.
- 11520, Freeport (Nassau): Canals on the south side of the village reach the Atlantic through salt marshes.
- 11561, Long Beach (Nassau): The city sits on a barrier island between Reynolds Channel and the ocean.
- 11702, Babylon (Suffolk): The village is bordered to the south by Great South Bay.
- 11751, Islip (Suffolk): The hamlet is on the north side of Great South Bay, across from Fire Island.
- 11743, Huntington (Suffolk): A North Shore hamlet, about 37 miles from Midtown Manhattan.
- 11772, Patchogue (Suffolk): The village sits on Patchogue Bay, part of the Great South Bay.
Whichever of these is your address, EPA's advice on prevention is the same: keep indoor humidity below 60 percent, ideally between 30 and 50 percent.
Frequently asked questions
Does a clean air test mean my house is mold-free? No. Mold spores are always in the air, so a sample finds some almost every time, and no standard says what number is safe. A passed clearance report is a visual finding that the work followed the plan.
Can the company that inspected my basement also remove the mold? Not if it is a licensed firm and the area is over 10 square feet. Under section 936 one licensee can't do both on the same property.
Do I have to hire a licensed company to clean a small patch? The state's law covers areas over 10 square feet. A homeowner can handle their own property under section 933, and the Department says you can remove a patch under 10 square feet yourself if you aren't sensitive to mold.
What if a company ignored these steps? Check its license in the Department's search tool and file the Department's online complaint form. A district inspector investigates.
Water in the house now? GlobePro Restoration answers at (929) 969-2534, any hour, or you can send a request. For the mold itself, bring the license number and the written plan to every conversation.
More from the blog
- Smoke Damage Insurance Claim in New York: What to Document Before Cleanup
- What Is Water Damage Restoration? Mitigation, Drying and Repairs Explained
- Smoke Damage Cleanup in an NYC Apartment After a Neighbor's Fire
- Does Homeowners Insurance Cover Sewer Backup in New York?
- Water Damage Insurance Claim in New York: The Photos, Readings and Paperwork to Keep